| Subcribe via RSS

Waterbug 800 8-Zone Water Sensor Alert Kit

October 22nd, 2009 | No Comments | Posted in Flood Alarms

Waterbug 800 8-Zone Water Sensor Alert Kit

Get advance notice of potentially hazardous water leaks in your home or office with a system that alerts you when water buildup is detected. The Waterbug 800 8-Zone Water Sensor Alert Kit can monitor up to eight supervised or 16 non-supervised zones; four supervised sensors are included, additional WaterBug Surface Sensors are available separately. The sensors detector work by forming a conductive bridge between two electrical contacts when it senses the presence of non-flammable conductive liquids. When water or moisture has been detected the main unit will alarm or trigger a relay on virtually any alert/security system such as EnviroAlert or automation system such as INSTEON that accepts a dry contact closure. This water sensor kit is ideal for bathrooms, laundry rooms, basement sump pumps, drain areas, computer rooms, document storage areas, warehouses and sprinkler systems.

View Waterbug 800 8-Zone Water Sensor Alert Kit Details

Tags: , , , ,

WATER HEATER AUTO-SHUTOFF, COMPRESSION

October 20th, 2009 | No Comments | Posted in Flood Alarms

WATER HEATER AUTO-SHUTOFF, COMPRESSION

Stop water heater leaks from becoming a disaster. Don’t risk your floors, carpets and other personal belongings to costly and ruinous water damage! Prevent flood damage and avoid costly repairs with the easy-to-install Water Heater Auto-Shutoff Valve. This system not only detects leaks early, but it automatically shuts your water off in the event of a leak, alerting you with the control panel’s alarm. The Floodstop monitor unit is pwered by the included AC adapter or four C batteries (sold separately). Designed for both residential and commercial dwellings, the Water Heater Auto-Shutoff Valve uses an automatic full-port, 1.25-inch motorized ball valve to shut off the water supply whenever your water heater leaks. The non-intrusive devices can be installed in as little as 10 minutes; no professional plumbers are required. This kit includes everything you need to protect your property from costly water-leak damage: a valve installed on your cold water inlet, a water sensor to be placed on the floor, and the control unit, which is mounted to your wall with the included screws. The Water Heater Auto-Shutoff Valve can be installed using two adjustable wrenches in minutes, although some older homes’ valves might be
View WATER HEATER AUTO-SHUTOFF, COMPRESSION Details

Tags: , , ,

Water Alarm Mini Kit

October 18th, 2009 | No Comments | Posted in Flood Alarms

Water Alarm Mini Kit

Gives alarm sound when water is detected |n||n|Technical Specifications: |n|? Incorporated alarm buzzer|n|? Water sensor can be placed at distance|n|? Power supply: 9V battery|n|? Dimensions: 45mm x 70mm (1.8″ x 2.8″)|n|

View Water Alarm Mini Kit Details

Featured: swarovski crystals

Tags: , ,

USP Water Level Sensor

October 16th, 2009 | No Comments | Posted in Flood Alarms

USP Water Level Sensor

Detects water leaks before becoming a major problem. Easy install to the USP Automatic Voice Dialers, just attach wires.

View USP Water Level Sensor Details

Tags: , ,

Signal Repeater for WaterCop Water and Freeze Sensors

October 14th, 2009 | No Comments | Posted in Flood Alarms

Signal Repeater for WaterCop Water and Freeze Sensors

Flood and Temperature Sensor Signal Booster Make certain your larger home or larger business is protected from water damge when water sensors or freeze sensors signal your WaterCop automatic water valve shut off device. Add the sensor signal repeater WHX1 to boost strength of radio signals from Water Hounds and Freeze Hounds to the Water Cop Actuator. Use in situations where the distance is great from the WaterCop moisture sensors or low temperature sensors to the actuators. AC power adapter is included. Picture shown is the WaterCop device (not included).

View Signal Repeater for WaterCop Water and Freeze Sensors Details

Tags: , , , , ,

FloodStop FS3/8-CD Sink Water Alarm Valve Shut Off

October 6th, 2009 | No Comments | Posted in Flood Alarms

FloodStop FS3/8-CD Sink Water Alarm Valve Shut Off

Avoid Costly Water Damage from Sink Leaks. with a Water Alarm and Water Shut Off System This advanced water leak detection system helps prevent water damage from sink related leaks. This simple-to-install plumbing supply stops water flow into sinks when water leaks are detected. An 87 db alarm sounds an alert. Prevents sink related water damage from leaking or ruptured water supply lines or overflows. The Flood Stop for Sinks uses Twin Full Port Motorized Water Valves with 3/8 Inch Compression Fitting for Hot and Cold Water Lines. Water from small leaks from lavatory sinks, kitchen sinks or laundry tubs are often small and unnoticed until significant water damage is discovered. Water collects under the sink, seeping between flooring and sub-flooring. Leakage is spotted once a damp floor or mildew odor occurs. Repairs are costly. Installation of this FloodStop unit is simple: Connect the water valve to cold and hot water lines under the sink. Mount the control unit. Place sensor(s) onfloor. Plug power supply into an unswitched outlet. Note: electricity is used only when the sensor detects water. NOTE: DO NOT PLACE SENSOR DIRECTLY ON METAL PAN OR DAMP FLOOR. If no water is present and alarm sounds, place paper towel or
View FloodStop FS3/8-CD Sink Water Alarm Valve Shut Off Details

Featured: mortgages in Spain

Tags: , , , , , ,

Control Products Battery-Operated Water Alarm Plus #WA-5000

October 4th, 2009 | No Comments | Posted in Flood Alarms

Control Products Battery-Operated Water Alarm Plus #WA-5000

The WaterAlarm Plus automatically calls any one phone nubmer when water is detected by the attached water sensor. When it calls, it plays a voice alarm message warning you of a water leak, overflowing sump, broken washing machine hose or plugged up to wash tub – anywhere you worry about water damaging your home, vacation property or business. The unit consists of two components, connected by a six foot wire. The alarm dialer connects to your existing telephone line and calls one phone number when water is detected. The water sensor includes an 85 decibel alarm and a detachable water sensor that can go on the floor, in a sump or anywhere you worry about water. It’s easy to install and batteries are included.

View Control Products Battery-Operated Water Alarm Plus #WA-5000 Details

Tags: , , , , , ,

Water Cop Motorized Actuator with 1 1/4 Inch Valve

September 22nd, 2009 | No Comments | Posted in Flood Alarms

Water Cop Motorized Actuator with 1 1/4 Inch Valve

Water Valve Actuator for 1.25 Inch Water Lines Automatic water shut-off valve device is an industrial quality, electrically automated full port brass ball valve featuring a “direct mount” actuator mounting for precision automation. Install this Water Cop actuator on the incoming main water supply line within a home or business. includes a security system alarm interface and a 1.25 Inch brass ball valve . The WaterCop actuator’s integrated 418MHz radio frequency receiver chip set has user adjustable digital security codes, which allows nearby Water Cop systems to operate independently. This unit features auxiliary low voltage contacts with modular RJ-45 interface socket for simplified connection to optional WaterCop accessories — or integrate with a third-party home security or home automation system using standard Cat-5 computer cabling. When used with a Water Hound moisture sensor, the Water Cop actuator is an automatic water valve shut off device. Use the actuator to shut off the main water valve by pushing the red button. The Water Cop has a built-in I/O port with RJ45 connection. No Water Hound Moisture Sensors are Included. Buy Water Hounds and Freeze Hounds Separately.

View Water Cop Motorized Actuator with 1 1/4 Inch Valve Details

Tags: , , , , ,

Remote Water Shut Off Switch for Water Cop

September 18th, 2009 | No Comments | Posted in Flood Alarms

Remote Water Shut Off Switch for Water Cop

Shut Off Main Water Valve With a Touch This water control wall switch is a remote switch for a WaterCop Electric Water Valve with Actuator that lets you turn on and off water instantly. Locate the remote shut off switch near an exit door, security system control box or where you choose. The RS 100 water control wall switch means you can easily turn off water when you leave for an evening, a week-end or for months. First, install a WaterCop electric water valve system. Then add WaterHound moisture sensors near water using appliances, sinks, toilets, etc in areas your want to protect from water damage. Add a FreezeHound low temperature sensor on your incoming main water pipe. Then add the RS100 remote switch. Install remote shut-off in handy location such as near back door or security system control box. Touch a button. Quick, convenient and positive shut-off of your main water supply. Green button turns WaterCop acutator on to open the brass water valve. Red button closes the water valve of the WaterCop. Allows remote user operation of WaterCop from convenient or high traffic area of the home. Ideal for kitchen, utility room or near a garage entry where your security alarm system control box is located. Using standard
View Remote Water Shut Off Switch for Water Cop Details

Tags: , , ,

Velleman Water Alarm Mini Kit

September 14th, 2009 | No Comments | Posted in Flood Alarms

Velleman Water Alarm Mini Kit

This kit can be very useful when water needs to be detected before any damage is done. A buzzer will sound when water is detected. The water sensor can be placed at a distance. Requires a 9 volt battery for power.

View Velleman Water Alarm Mini Kit Details

Tags: , , ,